|
At Micronics all printed circuit board
layouts are interactively routed. We can also take an autorouted
problem board and make it workable. All layouts are verified
for accuracy and design for manufacturability using Genesis2000
software (TM Orbotech). Micronics Technologies strives to
produce predictable, high yielding PCB designs using the latest
"design for manufacturability systems"- proven to
reduce cost and save time!
- Standard fast turnaround; 150 e.i.c. Board
artwork generated in less than one week
- Using the latest Altium and Pads/Perform/Power PCB software
with up to 40 layers
- PC board with densities down to .1 sq in/per
ic
- Rigid, rigid-flex, or flex circuit design
and layout
- Analog or digital, leaded or smd (both sides),
Specialist in RFdesign
- Blind, buried, or micro-via's
- Split plane technology and/or buried traces
or internal planes
- ECL, controlled impedance, stripline and
microstrip
- Netlist generation from customer supplied
files or schematics
- Full gate and pin swapping capabilities
- Hi-density designs with up to 3 tracks between IC pins at 1 mil grid
- ECO capabilities with input and output of
ascii files
- Gerber output for standard or laser photo
plotting
- Schematic capture or manually generated net
lists
 |
- Ability to create bare board test fixtures
utilizing net list data for absolute accuracy (true
"netlist" test)
- New design or revisions to existing
customer CAD data files
- Diagnostic to check for parallelism
and line length
- Aging product re-engineering
- Controlled impedance calculation using
Polar software
|
|
